-40%
Original 654540-001 HP 2.5
Original 654540-001 HP 2.5
Original 654540-001 HP 2.5
Original 654540-001 HP 2.5
Original 654540-001 HP 2.5
Original 654540-001 HP 2.5
Original 654540-001 HP 2.5
Original 654540-001 HP 2.5
Original 654540-001 HP 2.5
Original 654540-001 HP 2.5
Original 654540-001 HP 2.5
Original 654540-001 HP 2.5

Original 654540-001 HP 2.5" SSD to 3.5" SATA Adapter Tray SAS HDD Bracket Bay

$ 4.48

Availability: 230 in stock
  • Return shipping will be paid by: Seller
  • All returns accepted: Returns Accepted
  • Item must be returned within: 30 Days
  • Modified Item: No
  • Condition: New
  • Type: Caddy
  • Non-Domestic Product: No
  • Country/Region of Manufacture: China
  • Brand: HP
  • Refund will be given as: Money back or replacement (buyer's choice)
  • MPN: 654540-001

    Description

    Description:
    This adapter can adapts any 2.5" form factor SAS/SATA/SSD Drive to 3.5" form factor drive, without cables or hassles.
    Standard position mounting holes on Adapter's bottom and sides, equivalent to those found on a 3.5" hard drive, give you the flexibility to mount it anywhere a 3.5" drive is used.
    Adapter's fixed mount connectors are attached to a simple circuit board, assuring solid connections between devices, and the outside connector is positioned to plug into a backplane as the tray is inserted.
    Compatible with 3Gb/s and 6Gb/s SAS/SATA/SSD drives.
    No loss in data transfer speeds—no bridge chip used
    Structure -- SECC(Steel Electrogalvanized Cold-rolled Coil) Steel body
    Note:
    This adapter can convert any 2.5" SAS/SATA/SSD drive to 3.5" form factor. However, for 2.5" SAS drives, this adapter will change dual port to single port. This is fine for most applications. But if your application requires dual port, this adapter will not work for you. And, as always, a SAS controller is required in order to support SAS drives. A 2.5" SAS drives with this adapter installed will not work on a SATA controller although its connector looks exactly the same as a normal SATA connector
    Note:
    This adapter is compatible with all the 3.5" SAS / SATA drive caddie trays from HP, Dell, IBM, or other manufacturers, such as HP 651314-001, IBM 69Y5284, or Dell F238F.
    Model No: ASSY 654540-001 REV B
    External Interface: SATA(Max. SATA3.0 6Gbps/Sec)
    Compatible Drive Type:2.5" SATA or SAS HDD SSD
    Device fit: 3.5" SATA hard hot-swappable drive bay
    Structure: SECC(Steel Electrogalvanized Cold-rolled Coil) Steel body
    Dimension:147*101*12mm
    Weight:100g
    Shipping:
    Although the product page shows a handling time of 5 days, we will ship the item to you
    within two days
    .
    eBay assesses our logistics and asks us to ship the item within the handling time, and we have some custom products that take longer than the average products to handle, so we have to set the handling time as 5 days.
    Also you will receive the item before the inaccurate ETA (Estimated Time of Arrival) that shown on the product page.